Resin grinding wheel has the characteristics of certain elasticity, low heat resistance, good self-sharpening, easy production and short process cycle. Widely used for rough grinding, rough grinding, parting off and free grinding. Such as grinding steel ingots, casting burrs, etc. So how to choose the right resin grinding wheel? Next, let’s take a look at the five reasons for choosing a numerical grinding wheel.
1. Good uniform appearance and no cracks are the basic appearance of resin grinding wheels.
2. Sophisticated packaging and printing of anti-counterfeiting barcodes are the difference between genuine products and counterfeit products.
3. The lower the static unbalance value of any resin grinding wheel, the better, and of course the greater the production difficulty.
4. The general rule of cutting and grinding is that the amount of iron removed is less, and the grinding wheel is too hard if the wear is low. The amount of iron removed and the wear and tear are large because the materials used are too poor. The intrinsic qualities of good quality are as little wear as possible, maximum iron removal, and at the same time a good feel.
5. For carbon steel, alloy steel, cast steel, stainless steel, copper aluminum, glass stone. Because of their different tissue densities and heating conditions, it is decided that there are differences in the selection of grinding wheels. For glass stone, there are special glass stone cutting and grinding tools on the market. Copper aluminum and stainless steel solid materials should be cut or polished with lower thickness or zirconium corundum as the base material. For cutting carbon steel and stainless steel profiles (non-solid), the selection of grinding wheels with higher hardness will greatly increase the life.