The grinding wheel is suitable for cutting ordinary steel, steel pipe, angle steel, stainless steel, steel plate, stone and concrete. A metal angle grinder is a tool used for grinding, lapping and polishing. Most abrasives are man-made abrasives made from abrasives and binders. Today, I would like to share with you the reasons and solutions for the rapid loss and short life of the grinding wheel.
1. The selected hardness grinding wheel is not enough. Hard grinding discs are suitable for cutting other metals.
Solution: Choose a grinding disc with relatively high hardness.
2. The grinding wheel is too thin.
Solution: Choose a thicker grinding disc.
3. The speed of the angle grinder is too low.
Solution: Choose an angle grinder with a higher speed.
4. The power loss of the angle grinder under no load and load is too large.
Solution: reduce the cutting pressure or replace the angle grinder with higher power.
Resin grinding discs are widely used. For example, ultra-thin resin grinding wheels can be used to cut diamonds, gemstones, precision ceramics, LED substrates, electronic component pins, circuit boards, etc. The thick resin grinding disc can be used to cut curbs, marble, granite and so on.